Last edited 19 Nov 2026

Main author

Hamish Minaei Engineer Website

Version control

Contents

[edit] Introduction

Version control is the practice of recording changes to a document, drawing or model over time, so that any earlier state can be identified, compared and restored. In software development it has been standard practice for decades. In construction and engineering design it applies to drawings, models, specifications and schedules, where several people may edit the same information over the life of a project.

[edit] Why version control matters for drawings

Without a formal system, versions are often tracked through file names, such as SitePlan_v3_FINAL.dwg. This approach has several weaknesses:

  • It is not clear which file is current.
  • Two people can edit separate copies and overwrite each other's work.
  • The reason for a change is not recorded.
  • Superseded copies can be issued by mistake.

A version control system replaces file-name tracking with a single record for each drawing and a history of changes, each with an author, a date and a short description.

[edit] Key concepts

  • History: an ordered record of every saved change. Any earlier state can be viewed or restored.
  • Change description: a short note explaining what was changed and why, for example "Stair core moved 600 mm north following structural comments".
  • Comparison: a view showing the differences between two versions. For drawings this is usually visual, with added and removed geometry shown in different colours.
  • Branching: creating a separate line of work from a known version, for example to develop a design option, without changing the main drawing.
  • Merging: bringing the changes from a branch back into the main drawing once an option is approved.
  • Conflict: a situation where two branches change the same element in different ways, requiring a person to decide which change to keep.

[edit] Version control and information management

Version control works alongside formal information management processes. Under BS EN ISO 19650, information containers in a common data environment carry status and revision codes, and only approved information is shared or published. Version control tools record the detailed history behind each revision.

Branching is common in software and is beginning to appear in CAD tools. A study of 719 posts on online CAD forums found that designers wanted to use branching to explore design alternatives, although tool support was still limited (Cheng et al., 2023).

[edit] Related articles on Designing Buildings

[edit] External references

--Hamish Minaei 09:07, 19 Nov 2026 (BST)

Designing Buildings Anywhere

Get the Firefox add-on to access 20,000 definitions direct from any website

Find out more Accept cookies and
don't show me this again